YOUR VEHICLE

AP Racing AP Racing Brake Fluid

Please select your vehicle’s year, make and model above to verify compatibility.
Rating
based on 0 Reviews

To write a review please select specific product


Overview

AP Racing Brake Fluid

The key components of stopping your vehicle are the brake pads, calipers, brake lines, master cylinder, brake pedal and brake fluid. You would consider regular inspection and maintenance mandatory on all of these safety related parts, yet changing your brake fluid has become the missing piece of the puzzle.

We have had "you must change your engine oil regularly" hammered into our heads to prolong the life of the engine and protect it from dirt and particles from damaging engine components. You also need to pay attention to servicing your brake fluid on a regular basis (most manufactures recommend every two years).

Brake fluid's job is to carry pressure from the master cylinder, through the brake lines to the calipers, which puts pressure on the back of the brake pads that then clamp against the rotor to stop the vehicle. New brake fluid starts as an incompressible liquid and allows the brake system to function at peak design efficiency. The problem is over time it will become contaminated and become more compressible.

The better brake fluids typically are a glycol/ether chemical based fluid that has different hygroscopic rates (absorption of water from air) and boiling levels. As the brake fluid absorbs moisture over time, the incompressibility will deteriorate and the brake pedal travel will increase as pressure in the system is reduced, plus the boiling point of the brake fluid is also reduced. When overheated, brake fluid can boil which creates gas bubbles and the incompressibility can deteriorate to the point of having to pump the brakes to regain pressure (track enthusiasts can relate to this). Water saturated brake fluid will cause corrosion and increase viscosity (can harm ABS/ESP systems).

The rule of thumb, the higher the boiling point, the greater the hygroscopic properties and the higher frequency of maintenance. Most track cars using high temperature "race" brake fluids should change brake fluid or at least bleed the calipers after every race.

We only recommend AP Racing Brake Fluid and offer three options:

AP Racing Ultra 5.1 Brake and Clutch Fluid

AP Ultra 5.1 is AP Racing's high performance non silicone based brake and clutch fluid. Recommended for use in the hydraulic brake and clutch systems of all cars, for which a non petroleum based fluid is specified. Suitable for high performance applications including vehicles fitted with ABS and ESP for road and track day use.

AP Racing Super 600 Brake Fluid

AP Racing Super 600 fluid has a dry boiling point exceeding 300°C and has been developed for racing applications where high temperatures are being experienced, e.g. when using carbon discs and the ultimate in brake fluid performance is required.

AP Racing PRF608 Brake Fluid

AP Racing PRF608 is suitable for all top levels of motorsport where abnormal temperatures are experienced. It should be noted that before using R3 fluid, any existing brake fluid should be drained completely from the brake system.


Manufacturer

AP Racing

About AP Racing Parts & Accessories

For over 50 years, AP Racing has had one aim - to create winners on the race track. The world of motorsport has changed out of all recognition since those early days and AP Racing have spearheaded every major development in brake and clutch technology. In Grand Prix Racing our success started with the incredible Auto Unions and has continued uninterrupted ever since to the championship winning Williams, McLarens, Renaults, and Ferraris. Over the years this success has been repeated in all other types of Single Seaters including Champ Cars, Indy Racing League, Indy Lights, GP2, F3000, F3 etc. At the end of the 2011 season AP Racing had notched up an incredible 686 GP wins for cars using its Brakes and/or Clutches and are confident of increasing this tally in 2012. At the pinnacle of motor sport, numerous factors dictate the most specialized requirements for ultimate success. From the state of the art 3 dimensional solid modelling/design and Finite Element Analysis CAD facilities, to sophisticated research, development and testing including special dynamometers that simulate true racing speeds, AP Racing is constantly probing the boundaries of technology. From state of the art measuring centers, CNC machining and sophisticated stock control systems, to the intricate hand assembly, checking and testing of individual assemblies, AP Racing ensures its products perform when pushed to the absolute limits.


CUSTOMER REVIEWS

AP Racing Brake Fluid


    Rating
    based on 0 Reviews

    To write a review please select specific product