Nissan GTR AccessPORT
Mfg Part # : AP-NIS-006
The AccessPORT is the most user friendly reprogramming device for your vehicle's computer. The provided mapping will optimize the air/fuel ratio and ignition timing, remove the speed limiter, and more for performance results you can instantly feel!
However, the AccessPORT is so much MORE than just a REFLASH DEVICE. It allows you to monitor your Fuel Economy (average and real time), perform performance tests in order to estimate your 0-60mph and 1/4 mile time, read and decipher ECU trouble codes (CELs), and monitor live data via the OEM vehicle sensors which eliminates the need for costly aftermarket gauges. With the added ability to adjust timing and idle, the AccessPORT is truly more than just a programmer, it is the ultimate all-in-one solution for the automotive enthusiast.
Just about anyone with even the most basic of automotive knowledge can quickly and easily install an AccessPORT. No soldering, wire cutting/splicing or tools required.
Customize the AccessPORT by changing settings, such as selecting the language for displaying text.
Displays information about the AccessPORT firmware, serial number, and vendor. Easily check to make your AccessPORT stays up to date with the most current firmware.
Change mode of engine management for staged performance, fuel economy, theft deterrent, race mode or custom performance.
Show Current Map:
The AccessPORT can display the last map it applied in real time and the last map that it reflashed. To see the current map, select "Show Map" from the AccessPORT main menu.
Fuel Economy Gauge:
Monitor average and instantaneous fuel economy estimates to improve your driving techniques for optimal fuel efficiency. Customers have seen over a 5%-10% improvement in fuel consumption when used in conjunction with the Fuel Economy Map.
Display engine parameters: Check vehicle performance by monitoring engine parameters. The AccessPORT can read sensor data from the factory ECU and display it on screen. This feature allows the AccessPORT to function as an auxiliary gauge to display RPM, Coolant Temp., Battery Voltage, Intake Air Temp., Ignition Timing, Mass Air Flow and many more.
Rev Warning/Shift Light:
The screen will flash to indicate that a pre-set shift RPM has been exceeded while viewing engine parameters. The pre-set shift point is user settable through the SETTINGS menu.
The AccessPORT measures and displays 0-60 mph acceleration,60 ft. time, 1/8th and 1/4 mile E.T. and Trap Speeds. Use this feature to quantify performance modifications and driving techniques.
ECU Tool & Settings:
Control basic engine functions and conveniently reset the ECU from the comfort of the drivers seat instead of manually disconnecting the battery and losing all your radio presets and having to reset you clock.
Read Engine Diagnostic Codes:
Avoid an expensive trip to the dealership by reading the codes describing an illuminated check engine light. The provided code description may help to determine the cause of a problem.
Uninstall the AccessPORT from Vehicle:
The AccessPORT has the ability to easily remove its programming from the vehicle on which it is installed and return the ECU back to a stock state. To remove the AccessPORT from the vehicle and return it to a stock state, select "Uninstall" from the main menu.
NEW AccessPORT TCM Flashing Features! - ENHANCED LAUNCH CONTROL: Updates TCM to Nissan LC2 launch control logic with two user selectable launch control modes! Level 1 sets launch control revs to 3,300rpm (300 more than stock LC2) with more aggressive clutch engagement and throttle curve. Level 2 raises launch control revs to 3,700 rpm with the same clutch and throttle characteristics as Level 1. -
CLUTCH GEAR LEARNING: Perform this factory recommended annual optimization without a trip to the dealership. Shift quality degrades as transmission components wear. Performing this optimization recalibrates the transmission, resulting in smoother shifts and improved drivability.
TOUCH POINT ADJUSTMENT: Use the AccessPORT to adjust the amount of clutch drag while stationary. Eliminate excessive creep or set clutch drag for the perfect launch responsiveness with +/- 7 levels of adjustment. -
CLUTCH CAPACITY ADJUSTMENT: An essential adjustment for higher horsepower GT-Rs to eliminate clutch slip during full throttle upshifts. Increase or decrease clutch clamping force with +/- 7 levels of hydraulic pressure adjustment.
About COBB Parts & Accessories
COBB Tuning is an automotive engineering company dedicated to developing solutions that improve vehicle performance and the driving experience. COBB Tuning approaches design by taking the entire vehicle-platform into account as a complete system. Our ultra-high-quality products and services are professionally engineered, thoroughly tested and backed by industry leading customer service to ensure that they meet our objectives and exceed customer expectations.
Originally founded in Rockwall TX by Trey COBB in 1999, COBB Tuning is now headquartered in Austin TX with premier tuning and service facilities in Plano TX, Portland OR and Fountain Valley CA, which offer a wide range of services including; project car consultation and building, vehicle modifications, dyno tuning, general maintenance and repair.
From our initial Subaru focus, COBB Tuning has expanded its product offerings to BMW, Ford, Mazda, Porsche , Mitsubishi and Nissan specializing in engine management electronics, intake tract components, turbocharged exhaust systems, turbo kits, drivetrain components and suspension components.
We are a one-stop firm with an enviable set of qualified skills and the exceptional ability to design, engineer, manufacture, test and service our own products under one roof. Whether it's our state-of-the-art Accessport ECU programmer, our exceptional bolt-on performance products, a professional tune on one of our four Mustang AWD chassis dynamometers or consulting with our build specialists on your next project, COBB Tuning has the experience, skill and attitude to meet your specific needs.
THIS PART FITS
- 2009 - 2014 Nissan GT-R