2007-2009 Nissan 350Z Generation 3 Ultra Long Tube Dual Intake Kit
- 20 Rear Wheel Horsepower Gain
- Oil or Trans Cooler Require Custom Modification
- Ultra Long Mandrel Bent Polished Aluminum Intake Tubes
- Genuine K&N Filters w/ 1,000,000 Mile Warranty
- Installation Requires Mild Enlarging of Core Support
- Nismo Models Require H-Brace Removal
- CARB Approved - E.O. #D-436-16
Mfg Part # : 402845
STILLEN High Flow Cold Air Intake Kits for Nissan and Infiniti
STILLEN offers our exclusive Generation 3 Ultra Long Tube Intake for the dual throttle body VQ engines.
At STILLEN, good is never good enough. Our continuing dedication to extracting maximum performance from the VQ37 powerplant led to the introduction of our new Generation 3 Ultra Long Tube Cold Air Intake Kit for VQ37 equipped vehicles.
Our R&D team engineered and dyno tested more than 50 variations before identifying this design as the best solution available for the VQ37 engine.
The Gen 3 intake has a radically updated design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. It features an integrated system of variable diameter tubing and steps to maximize air velocity, including additional polished tubes that pass through the front core support.
TWO FILTERS ARE BETTER THAN ONE
The new Ultra Long Tube Cold Air Intake places two large air filters in front of the radiator. This strategic placement of the filters allow for optimum cold air flow and easy filter access and removal for cleaning. On some applications such as the G37, urethane splash guards are included in the kit to help protect the filters.
PROVEN POWER GAINS
The power result: A dyno-proven:
20 horsepower gain at the wheels on the dual throttle body 350Z
18.5 horsepower gain at the wheels on the G37 coupe
17.5 horsepower gain at the wheels on the 370Z
14 horsepower gain at the wheels on the G35/G37 sedan
No other intake for the VQ can match these power gains!
FASTER, QUICKER, FARTHER – PICK ALL 3
Your needs are simple…you want to go faster, quicker and farther.
You want performance parts that are:
- Dyno- proven to deliver on their promise.
- Easy to install.
- Hassle free at smog check time.
Is that really too much to ask for? Thanks to the performance experts at STILLEN, not only is it is possible, it’s downright easy!
Just install a STILLEN high flow cold air intake kit on your G or Z. STILLEN high flow cold air intakes boost power and performance while increasing fuel efficiency! Plus, you get the added benefit of that signature STILLEN sound and style. It might just be the best dollar-per-horsepower investment you make!
When you install a STILLEN air intake, you can be confident you're using the best air intake kit on the market - one you can be sure delivers the performance gains you're seeking.
MADE IN USA
All STILLEN air intakes are designed, tested and manufactured right here at our Orange County California facilities. Our engineers develop and optimize each intake to generate peak horsepower and torque increases across the RPM range. Once a design is finalized, our expert craftsmen manufacture and assemble each air intake kit with pride and precision.
BETTER THAN STOCK
If an aftermarket high flow air intake kit can make a vehicle more powerful and efficient, why don’t car manufacturers design, build and install them as original equipment? It’s all about compromise and cost control. Once car designers and engineers are done creating their dream version of a new vehicle, the bean counters step in. Their job - maximize production efficiency and minimize parts costs. Call it a reality check, because the reality is, the average car owner wants the lowest priced, lowest maintenance and quietest vehicle they can afford.
WHEN GOOD ENOUGH ISN'T
If you’re like most automotive enthusiasts, though, good enough…isn’t.
- You want to unleash the power that the accountants collared.
- You want to hear your engine breathing freely, no longer choked by design and cost-cutting compromises.
- You want to dress up your engine compartment with performance parts that look great and deliver real world benefits.
STILLEN: YOUR AIR POWER EXPERTS
Here at STILLEN, we’re experts at performing engine CPR via high performance air intake upgrades.
The steps sound simple on paper:
- Achieve a laminar airflow through the intake passages by replacing accordion style factory intake tubing with smooth walled pipes.
- Increase airflow and filtration efficiency by replacing factory panel filters with high performance cone or barrel air filters with larger surface area.
- Improve airflow by replacing restrictive factory intake tubing with larger diameter pipes, some featuring design manipulation to increase airflow velocity as well.
- When practical, relocate air filter location outside the engine bay to access fresher, cooler intake air.
The reality is much more complicated. Each STILLEN high flow cold air intake kit can take months of design and testing to perfect. In some cases we’ve produced more than 50 prototype variants before finalizing a design! Most STILLEN air intake kits are 50 state legal, adding more layers of testing and approvals to attain CARB exempt status.
Think of it this way: we’ve done the hard work so you don’t have to.
DRY FILTERS VS. OILED FILTERS
Year after year, the debate rages on:
“Dry filters are easy to maintain than oiled filters.”
“Yeah, but oiled filters offer better filtration than dry filters.”
“Yeah, well, oiled filters will contaminate your MAF sensor”.
Let STILLEN filter out the noise for you: both types of filters work very well, and far better than cheap OEM panel filters. These days filter technology has come so far and is so good that it really comes down to user/owner preference.
Oiled filters will not damage your MAF sensor. K&N Engineering was the first company to employ oiled filters in their intake designs. They have tested their oiled filters for decades and continue to test their filters and oils against the latest technology coming out from the OE’s. Every time they test their products they find that there is no damage being done to electronic components or engine internals caused by their oils. For more information on this visit the K&N website here:www.knfilters.com/maf/massair.htm
If you still feel unsure about using an oiled filter, simply select the dry filter option for your STILLEN air intake kit. As an added benefit, a dry filter is slightly easier to clean and maintain.
Each STILLEN High Flow Air Intake kit includes high quality K&N cone filter(s) or AEM dry filter(s) on select kits.
Note that the high flow design increases the volume of engine note both inside and outside the cabin. Performance-minded enthusiasts typically find the authoritative note of a high flow air intake pleasing.
Most STILLEN High Flow Intakes are CARB Exempt. Others are currently CARB Pending, and may not be 50 state legal until exempt. Clean your filter regularly for best results.
Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support. No other parts relocation or removal is required.
- Click Here to see the 350Z Blog entry with additional photos and information.
- Click Here to see the 370Z Blog entry with additional photos and information.
- Click Here to see the G37 Coupe Blog entry with additional photos and information.
- Click Here to see the G37 Sedan Blog entry with additional photos and information.
- Click Here to see the G35 Sedan Blog entry with additional photos and information.
- Check Out Modified's Review On STILLEN's Gen 3 Intake
CALL TODAY AND BREATHE EASIER TOMORROW
Call our Power, Performance and Style Experts at 866-250-5542 to order your STILLEN high flow cold air intake system!
About STILLEN Parts & Accessories
Steve Millen Sportparts, Inc. and STILLEN humbly started their race to the front of the pack in 1986. Starting with aftermarket mini-truck appearance packages, we quickly found ourselves fulfilling customer's requests to build products for other vehicles such as vans and full-sized trucks.
With that came performance parts, suspension pieces, and upgraded brake products such as big brake systems. Capitalizing on his racing career, and knowing what it took to make sports cars perform like no other, it was only natural for Steve Millen to branch out into the import car scene. Over two decades later, we offer a full array of products encompassing styling, performance, handling, and braking products for just about any car, truck, or SUV.
THIS PART FITS
- 2007 - 2009 Nissan 350Z
2007-2009 Nissan 350Z Generation 3 Ultra Long Tube Dual Intake Kit
Sean Cottmanby Sean CottmanI didn't get my 12 g37 journey sedan on the dyno but, there's some extra power available, real power! I'm pretty mechanically inclined but the hardest part of the install was removing and replacing the front fascia. It's worth it though! 2/3/20153/5/2015
Eric Masonby Eric MasonI purchased the Gen 3 CAI and installation was pretty easy for the most part. Paired with the Stillen Cat-back Exhaust my 350Z is truly primal. Thank you Kenny Doung for the recommendation of what intake and exhaust to get. I haven't dyno the Z with new setup but will next month. However my Butt-dyno tells me at least 25-30hp for the pair.8/11/2014
Tony Boyceby Tony BoyceA big shout out & thank you to Adam Hume for all his help & advice answering numerous emails regarding various performance parts.
I ordered the Gen 3 intakes for my 2014 370Z & was shipped to Australia via US Postal with a 9 day delivery time. Awesome!
I installed the intakes myself without too much drama & I'd never done anything like this before. Anyway after installation I was instantly gratified by increased power & deep throaty growl when you give it the boot. Totally unexpected & couldn't be happier. Looking forward to doing more mods, next will be ceramic headers.
Highly recommend. :)8/11/2014
Miguel Estrellaby Miguel EstrellaI bought this CAI for my 2008 Infiniti G37 Coupe and it makes a big difference! When you stomp on the car WOT you can definitely hear it come to life! I also got a tune and I got 311 whp on a 5AT. (w/ other mods included of course)6/6/2014
Matthew Triceby Matthew TriceAfter installing this intake I could instantly feel the gains and performance boost. The sound is amazing and the materials used in the kit are quality. Great product!!!9/2/2013
Kenneth Howardby Kenneth HowardIt truly does not get any better than this! The horsepower gains and the sounds of Nissan power at work are nothing short of outstanding. All that a bag of chips and 12 Snapples
To go! This is a must have addition for any 370Z Owner.12/31/1969